• Mr. Nikhil A. Sherje
• Prof.Manish Chudare

Seismic design relies on inelastic deformation through hysteretic behavior. During severe earthquakes the structural system undergoes extensive damage that result in high cost of repair. Research these days has elevated and surpassed common human instinct. The installation of braces within a structure system will magnetize substantial part of destruction while the parent elements persist elastically with inferior inelastic deformation. In the present work will be structured in a reinforced concrete G+7 storied moment resisting frame building which will be modeled using (Software for Analysis and Design) SAP-2000. The building will be modeled in accordance with the provisions prescribed by IS1893:2002 part I. Three patterns of bracing will be fabricated on the peripheral frame of erection, where pattern being X, V and Inverted V. Both types of non linear analysis i.e. dynamic time history (NTH) and non linear static (pushover) analysis will be carried out to investigate the performance of building structure due to induced dynamic forces by ground excitation. Results for NTH will described in the form of storey displacement, storey drift, shear force, bending moment and energy dissipated by frame and bracing. Whereas pushover analysis results will be quantified through different parameters like yield shear, yield displacement, target displacement and ductility ratio.

Bracing, SAP-2000, G+7, Deformation, Frame, Dissipated.

"Analytical Study on Seismic Response Control of Multistory RC Building Frame Using Various Types of Bracing Systems", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.5, Issue 5, page no.562-572, May-2018, Available :http://www.jetir.org/papers/JETIR18IC104.pdf

"Analytical Study on Seismic Response Control of Multistory RC Building Frame Using Various Types of Bracing Systems", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.5, Issue 5, page no. pp562-572, May-2018, Available at : http://www.jetir.org/papers/JETIR18IC104.pdf