• T.Tharun kumar
• V.Sunil kumar Reddy

The electronic commutation and the low inductance nature of the brushless dc motor (BLDC) deteriorate the expected performance. The ripples in the current waveshape are primarily due to the commutation of the phases, which is carried to produce a synchronously rotating magnetic field. This commutation ripples lead to mechanical pulsation and noise on the rotor side. This article presents a novel strategy for reducing the commutation torque ripple. The proposed topology uses a hybrid Cuk voltage ´ gain dc–dc converter at the front end, which has high voltage gain and which reduces voltage ratings of the dc supply. An auxiliary switch is connected across the dc link of the inverter to control the rate of rising incoming phase current during the phase change of the inverter with the help of the dc–dc converter. A prototype of a 1HP BLDC motor is used to validate the proposed topology both analytically and experimentally.

Brushless dc motor, switched capacitor dc–dc converter, torque ripple compensation.

"A High-Voltage Gain Circuit Topology for Minimizing Commutation Torque Ripple with Enhanced Voltage Gain", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.11, Issue 6, page no.a316-a324, June-2024, Available :http://www.jetir.org/papers/JETIR2406039.pdf

"A High-Voltage Gain Circuit Topology for Minimizing Commutation Torque Ripple with Enhanced Voltage Gain", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.11, Issue 6, page no. ppa316-a324, June-2024, Available at : http://www.jetir.org/papers/JETIR2406039.pdf