• Trupti Dhage
• Abhijeet Galatage

Analysis of industrial building, the structural members with maximum efficiency & minimum cost is always a challenge to the Architects & Engineers. The structural system of the building has to support the lateral loads due to wind Load in addition to gravity loads. A lateral load develops high stresses and produces way causing drift. If the buildings are not designed to resist the lateral loads, then they may be collapse resulting into the loss of life or its content. Therefore, it’s important for the structure to have not only sufficient strength against gravity loads but also the adequate stiffness to resist lateral forces. But these devices are very costly and effective only for high rise buildings. Hence there is a need to study the LLRSS or technology suitable for a particular height of building. The objective of this research is to propose simple but innovative and effective LLRSS or structural technology and methodology for the wind load effect control which can be used in new as well as old building structures. Hence, it is proposed to study the response of steel buildings/frames with bracings configurations as a LLRSS to control the vibration and storey drift. The structural response parameters selected for the study are displacement and roof displacement. The comparative study will be presented with respective to buckling analysis, strengthening and wet ratios using codes.

"“DYNAMIC ANALYSIS OF INDUSTRIAL BUILDING USING ANSYS SOFTWARE”", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.11, Issue 6, page no.e711-e717, June-2024, Available :http://www.jetir.org/papers/JETIR2406492.pdf

"“DYNAMIC ANALYSIS OF INDUSTRIAL BUILDING USING ANSYS SOFTWARE”", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.11, Issue 6, page no. ppe711-e717, June-2024, Available at : http://www.jetir.org/papers/JETIR2406492.pdf