• kunda Aruna Kumari
• Yarrabolu Sai Phaneendra
• Yeragalla Raghu Chandra
• Chavala Ashok
• A. Rajendra

In structural engineering, a pre-engineered building (PEB) is designed by a manufacturer to be fabricated using a pre-determined inventory of raw materials and manufacturing methods that can efficiently satisfy a wide range of structural and aesthetic design requirements. Pre- engineered steel buildings can be fitted with different structural accessories including mezzanine floors, canopies, fascia‘s, interior partitions etc. The building is made water proof by use of special mastic beads, filler strips and trims. Pre-engineered building is an assembly of I-shaped members, often referred as I-beams. In pre- engineered buildings, the I beams used are usually formed by welding plates steel together to form the I section. The I beams are then field-assembled (e.g. bolted connections) to form the entire frame of the pre-engineered building. Some manufacturers taper the framing members (varying in web depth) according to the local loading effects. Larger plate dimensions are used in areas of higher load effects. The Industrial Warehouse is a closed structure to store the goods and raw materials in protective storage. These are used for protection from weather, protection from direct sunlight. This type of warehouse need special structures to be built, thus enables the Heavy vehicles to enter for loading and unloading purpose. Hence Pre-Engineered buildings are specially designed. In this project, An Industrial ware house is taken modeled in Staad.Pro Axial Forces, Axial stresses, Shear Force, Bending Moment, Maximum displacement, Torsion are calculated for all Columns, Bracing, Purlins and Bracing

– Pre Engineered Building, Industrial Warehouse, Tapered Section

" A STUDY AND DESIGN OF PRE-ENGINEERED BUILDING STRUCTURE FOR INDUSTRIAL WAREHOUSE BY USING STAAD.Pro", International Journal of Emerging Technologies and Innovative Research (www.jetir.org), ISSN:2349-5162, Vol.6, Issue 4, page no.22-28, April-2019, Available :http://www.jetir.org/papers/JETIRBG06004.pdf

" A STUDY AND DESIGN OF PRE-ENGINEERED BUILDING STRUCTURE FOR INDUSTRIAL WAREHOUSE BY USING STAAD.Pro", International Journal of Emerging Technologies and Innovative Research (www.jetir.org | UGC and issn Approved), ISSN:2349-5162, Vol.6, Issue 4, page no. pp22-28, April-2019, Available at : http://www.jetir.org/papers/JETIRBG06004.pdf